Single Girder Travelling Speed 20m/Min 5Ton Lifting Electric Wire
Rope Cable Hoist
Brief Introduction
The electric wire rope hoist CD1/MD1 model have features of
compact, light, small-sized shape and smooth operation. It can be
used not only on the overhead rails, but also be used in
conjunction with many types of electric or manual cranes such as
the
single-grider crane, the double-grider crane, the cantilever crane
and the gantry cranes. The eletric hoist model MD1 with double
lifting speeds should be used in case where the hoist model CD1 can
not meet the requirements for fine abjustments during
recision operations.
Main Characteristics
* Model CD1, MD1 electric wire rope hoist is a small sized lifting
equipment, which can be mounted on single beam, bridge, gantry and
arm crane.
* With slight modification, it can also be used as a winch.
* It is widely used in factories, mines, harbours, warehouses,
cargo storage areas and shops, essential in raising working
efficiency and improving working conditions.
* Model CD1 electric hoist has only normal speed, which can satisfy
normal application.
* Model MD1 electric hoist provides two speeds: normal speed and
low speed. At a low speed, it can do precise loading and unloading,
mounding of sand box, maintenance of machine tools. etc.
Technical configuration
| Model | Lifting Capacity (t) | Lifting Height (m) | Lifting Speed (m/min) | Running Speed (m/min) | Wire Rope Type | Dia.of Wire Rope (mm) | I Beam Track Type | Working Duty | Lifting Motor | Running Motor |
| Power(kw) | R.P.M ( r/min) | Power Supply | Power(kw) | R.P.M ( r/min) | Power Supply |
| CD1-0.25 | 0.25 | 3-9 | 8 | 20 | 6*19 | 3.6 | 16-22b | M3 | 0.4 | 1380 | 220-440V 50/60HZ 3Phase | 0.06 | 1400 | 220-440V 50/60HZ 3Phase |
| CD1-0.5 | 0.5 | 6-12 | 8 | 20 | 6*37+1 | 4.8 | 16-28b | M3 | 0.8 | 1380 | 0.2 | 1380 |
| CD1-1 | 1 | 6-30 | 8 | 20 | 6*37+1 | 7.4 | 16-28b | M3 | 1.5 | 1380 | 0.2 | 1380 |
| CD1-2 | 2 | 6-30 | 8 | 20 | 6*37+1 | 11 | 20a-32c | M3 | 3 | 1380 | 0.4 | 1380 |
| CD1-3 | 3 | 6-30 | 8 | 20 | 6*37+1 | 13 | 20a-32c | M3 | 4.5 | 1380 | 0.4 | 1380 |
| CD1-5 | 5 | 6-30 | 8 | 20 | 6*37+1 | 15 | 25a-63c | M3 | 7.5 | 1380 | 0.8 | 1380 |
| CD1-10 | 10 | 6-30 | 7 | 20 | 6*37+1 | 15 | 25a-63c | M3 | 13 | 1400 | 0.8*2 | 1380 |
| CD1-16 | 16 | 6-30 | 3.5 | 20 | 6*37+1 | 15 | 45a-63c | M2 | 13 | 1400 | 0.8*2 | 1380 |
| CD1-20 | 20 | 6-30 | 3.5 | 20 | 6*37+1 | 20 | 50a-63c | M2 | 13 | 1400 | 0.8*2 | 1380 |
Notes
A. The standard lifting height is 6, 9, 12, 18, 24, 30 and 36
meters.
B. The lifting speed can be single speed or double speed, even
multi-speed with frequency inverters.
C. The suitable rail for the low-headroom hoist is H-type rail, and
I-type rail is also available..
D. The recommended rope reeving of this kind of hoist is 2/1, 4/2
or 4/1.
E. The normal traveling speed is 20m/min, and 12.5, 16, 25, 30,
45m/min by request.
F. The normal rail gauge of the double-girder is 1200, 1500, 1800,
2100 and 2300mm.
Product show:
